Pages: [1] 2

Author Topic: Tippmann X7 Mag Fed Conversion Kit Support  (Read 2692 times)

jetson

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 56
  • tempus fugit
    • View Profile
Tippmann X7 Mag Fed Conversion Kit Support
« on: September 27, 2010, 02:15:56 PM »

This is where you can post questions and get information on the mag fed conversion kit as well as helping others to put their kits together.






Tacamo respects your love for the Tippmann® X7®…and your desire to try out the hot new magazine-only game formats, like at “Operation: End War,” and an increasing number of events across the country. When you want to get that hopper out of your way, open up your field of vision, improve the balance and natural point of aim of your marker, and get rocking with a true mil-sim piece that not only looks but also reloads and points the same as the real thing, you need the Tacamo Magazine Conversion Kit.

It works with the Tippmann® X7® you already own—that’s the beauty of this revolutionary aftermarket accessory.

Disassemble your Tippmann® X7®, and follow the included instructions to transfer the internal parts to the Tacamo Magazine Conversion Kit. After assembly, you’ll have a marker that retains the heart and soul of the Tippmann® X7® you know and love, but accepts detachable magazines instead of ugly, noisy, bulky hoppers.

Then you can rock 20 rounds at a time, making every shot count like a pump player…but relying on the semi-auto firepower of your trusted marker, and the spring-fed reliability (a ball in the chamber every time—no matter the rate of fire, or angle of the marker) of the RAP4 magazine.

Tacamo’s engineers have been working on this kit for a long time, getting the compatibility perfect…and then focusing on the aesthetics outside. The Tacamo X7® Magazine Conversion Kit retains the aesthetic, helping you achieve the look of military arm. The Magazine Conversion Kit even takes your standard trigger group, or the aftermarket electronic trigger groups for a real firepower increase!

If you want the advantages and aesthetics of a magazine fed marker, but without sacrificing the onboard paint capacity of a hopper, pick up a RAP4 Box Magazine and put 250 balls onboard your marker.

When you’re serious about woodsball, mil-sim, looking authentic or just having fun, you need to take your Tippmann® X7® to the next level with Tacamo!


Key Features Include:
 - Enables you to accept RAP4 Interchangeable Magazines
 - Improve handling, balance, natural point of aim
 - All necessary parts for conversion are included
 - You can still use your hopper when you need to
 - Completely replaces the body panels of your marker
 - Retain and use the marker’s internal parts and most accessories
 - Opens up your field of view
 - Breathe new life into old designs
 - Designed to enhance the aesthetics of your chosen marker
 - Takes you to a whole new level of tactical paintball!


This kit includes:
- 1 x Magazine Conversion
- 1 x 20rnds Magazine
Logged

hansolo_uk

  • Newbie
  • *
  • Posts: 2
  • looking for a job in paintball industry
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #1 on: October 10, 2010, 04:22:18 AM »

looks really good, does the new kit allow the use of rear/stock mounted tanks and/or butt with remote connection

Awwshoot

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #2 on: December 09, 2010, 05:52:57 AM »

When is this fore grip and sights coming for the X7. I already have Scenario Arms SCAR Stock and these would finish it off nicely.

What length barrel do these require?

Planned price?
Logged

jetson

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 56
  • tempus fugit
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #3 on: December 17, 2010, 05:39:25 PM »

you will need a 12" or longer
Logged

Awwshoot

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #4 on: December 22, 2010, 01:44:13 PM »

Thanks Jetson!

Hmmm. I'm going to be running an 8.5" Hammerhead Sharktooth so I may have to rethink my setup plans.
Logged

ClayRB34

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #5 on: December 23, 2010, 07:21:17 PM »

I have a flatline barrel with my X7 can i still use it with my conversion kit?
Logged

jetson

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 56
  • tempus fugit
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #6 on: December 24, 2010, 10:33:15 AM »

yes, it will work
Logged

ClayRB34

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #7 on: December 25, 2010, 01:13:27 PM »

can i use my e-grip and Internal Flexi Air Kit from rap4
Logged

jetson

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 56
  • tempus fugit
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #8 on: December 29, 2010, 03:20:56 PM »

yes you can
Logged

ClayRB34

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #9 on: March 18, 2011, 09:14:17 PM »

what parts exactly does the conversion kit use from your old X7?
Logged

osw1183

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #10 on: October 01, 2011, 02:20:32 PM »

Is there plans to create an adaptor to allow existing barrel shrouds to fit on the new magazine conversion kit?  Such a the 416 shroud (http://www.tacamopaintball.com/barrel-kit/28-tacamo-x7-k416-barrel-kit)
Logged

RimtheGrim

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #11 on: October 13, 2011, 09:17:47 PM »

Hi Guys got my MK7 kit yesterday and put it all together, having a few problems.
First off the clam shells come together very snuggly, I have some trouble getting the end cap on, and when I want to remove the end cap I have to pull the 2 clam shell halves apart as it will on come out easily, I do this because I do not want to damage or scratch up the parts by attempting to pry out with a screw driver or whatever.
I Took it outand put 2 mags through it.
It did not recock.
Every time I shoot out a ball I would have to recock it manually.
I pulled it apart gave it a good lube and oil up and attempted to dry fire it again.
I still had to recock after every shot.
What can I do to fix up this problem?
Now away from that, I am assuming this can all easily be fixed up etc. where do I get the mod to make my MK7 look like the one in the press shots, and what are the mod names?
Of particular interest is the mod to cover up the dreadful looking gap between the trigger frame and the mag, below the tombstone. 
Logged

Greyra66it

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #12 on: January 06, 2012, 02:24:55 AM »

Hi there my mag conversion is working fine was a bit tight had to remove some material from the sides of the front bolt ...... but my concern is the hideous gap between the mag housing and the trigger guard not so bad if running the standard air line and asa but a few of the guys i know plus myself have an internal air kit fitted do you know of any fix for the gap as the promo pics show no gap it has a much better finish than the kit that i have recieved !? ......... any help would be great
Logged

Kretzer73

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #13 on: February 23, 2012, 09:28:15 PM »

Will you be able to use the Commando Air-through Stock with this?
Logged

Kretzer73

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Tippmann X7 Mag Fed Conversion Kit Support
« Reply #14 on: February 24, 2012, 06:29:52 PM »

Will the Tippmann Air through Commando stock work with this kit?
Logged
Pages: [1] 2