Print

[darkfox]

test on field, was not good
threre is a spring problem and may be other part because for shooting one time you have to touch sweetely the triggler, if not , that shoot more than one time..and detroy the second ball.
i just receive one sheet of paper if there s more i don t have .
( we saw that the ps triggler have a space more short  than the new triggler .for the spring ( you add one thing on the T98 video) and the little large part add is not in the kit too ( always on t98 video ) 

we remake the sierra and he work very well , with rt and cyclone ...but with this kit we have problem like that make little rt effect .

so thanks to help us to understand and find solution ( or may be we don t have all part of kit)

[kAISER9701]

#3 the hose runs inside the body and out back - from there  you can choose your air stock style to attach your remote line
check out the video below with the tippmann x7 phenom

Hi. I own a TPN Sierra One (the mag feed kit should be compatible right?) and I wonder if the hose can actually run out back like the X7 Phenom for Project Salvo/Sierra One markers. Because the X7s were built for air-thru stock compatibility, but not Project Salvo/Sierra One (which were based off 98 Custom).

Had a check through Google and came up with this on RAP4 forums: http://forum.rap4.com/index.php?topic=14360.0 . Apparently have to buy another kit [yet to be in production].

[estroxforeva]

So I ordered my kit online and when it arrived,I was excited!I had heard so much good and cool things about it,and when I opened it,I wasn't disappointed!I took out the parts,and disassembled my Project Salvo,and then came the bummer part.My Salvo allen keys didn't fit the Tacamo screws,and I was unable to separate the Tacamo body.I looked around,but I didn't see an allen key that might have come with the kit.
I tried using different allen wrenches,even trying a home improvement DIY kit that comes with all sorts of different sizes,and apparently,none of them fit either!So I'd like to know if anyone has any idea on how to disassemble the original body of the marker,and with what allen key size??

[mason1108]

With the internal airline does that run any risk of freezing/damaging your internals if using Co2

[TrevoR5392]

hey was wondering if any one could answer this question i have the kit already installed but the problem im having is that my kit didnt come with trigger spring spacer or the spacers from the video (are they necessary) another thing is when i shoot the gun seems to jam and i dont know wats causing it and after it jams im stuck with a double shot. and that just a waste and is messing up my barrel cuz the second ball seems to burst in the barrel can any one help me figure out what is going on with this cuz i would like to get it fully operational.